ARGUS 220 - KNX movement detector

ARGUS 220 - KNX movement detectorKNX ARGUS 220. KNX outdoor motion detector. 220° surface monitoring for large house fronts and sections of buildings. With integrated bus coupler. The physical address is programmed using a magnet. 360° short-range zone (approx. 4 m radius). Large wiring space and plug-in system. Looping is possible. LED function indicator for quick alignment at the installation site. The operating elements are protected underneath the easily accessible cover plate. Flexibly adjustable sensor head. Blanking of individual lens areas possible. Wall and ceiling mounting possible without additional accessories. Can be mounted on inside/outside corners and downpipes using a mounting bracket. KNX software functions: Five motion blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, Master, Slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set via ETS or the potentiometer. Self-adjusting staircase timer. Angle of detection: 220°. Range: max. 16 m. Number of levels: 7. Number of zones: 112 with 448 switching segments. Light sensor: continuously adjustable from approx. 3 - 1000 lux (infinite lux: motion detection is independent of the position of the sensor head). Time: externally adjustable from 1 s to approx. 8 min in 6 steps, or via ETS from approx. 3 s to approx. 152 hours. Sensitivity: continuously adjustable. Possible sensor head settings: Wall mounting: 9° up, 24° down, 12° left/right, ±12° axial. Ceiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axial. Degree of protection: IP 55. Contents: With cover plate and segments to limit the detection area, screws and wall plugs. Colour: dark brazilian.