Interface RF

KNX RF radio converter

Project design and commissioning with ETS5 or a more recent version

Intended use

• Connection of KNX radio networks with cabled KNX lines
• Extension of the radio range in KNX radio networks
• (repeater operation, external power supply with 24 V AC/DC, e.g. ref.-no.
• NT 2415 REG VDC)
• Installation in flush box with dimensions according to DIN 49073 in combination with
a suitable cover

Product characteristics

• Use as media coupler in the function of area or line coupler (depending on the
• physical address)
• Use as KNX RF repeater possible
• Filter settings and filter tables
• As of V01: KNX Data Secure compatible with ETS 5.7.3 or higher
• Influence on forwarding of group telegrams (routing) by filter function in coupler
• operation
• Support of the full address range (groups 0-31) for filter function
• Forwarding of group telegrams (TP > RF, RF > TP) parameterizable
• Forwarding of physically addressed telegrams (TP > RF, RF > TP) parameterizable
• Forwarding of broadcast telegrams (TP > RF, RF > TP) parameterizable
• Telegram repetitions in case of transmission errors for group, broadcast and
• physically addressed telegrams can be set on the TP side
• Telegram confirmation for group and physically addressed telegrams can be
• separately configured on the TP sid
• Configuration lock can be set (programming only via TP or RF)
• Status LED
• Conversion and generation of RF system broadcast telegrams
• Support of long frames
• Safe-state mode to stop the application program (e.g. if the device does not function
• properly due to errors in the project design or during commissioning)
• Function for reset to delivery state