MOVEMENT DETECTOR RECESSED IN CEILING 360º WIRELESS ON BATTERIES

Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
Built-in light sensor, allowing to limit the operation of the detector to daylight.
It has 2 operation modes:
Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 and CO KNX 002.
Presence detector: useful for heating and air conditioning control.
Compatible with the actuators: TM KNX 001 and CO KNX 002.
Incorporates Temperature sensor.
Coverage: 360º and Ø7m at 2.5 high.
Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
Radio-frequency: 868,4MHz.

INSTRUCTIONS

TECHNICAL CHARACTERISTICS

Product reference	DM KNX 001
Power Supply (V)	1 batería 3,6V LS14250
Battery life	> 4 años (50 det/día)
Output channels	1
Maximum Number of Equipments	0
Detecting angle (º)	360
Mounting height (m)	2.5
Coverage diameter (m)	7
Start up	Easy Mode
Maximum number of extra movement sensor	0
Maximum Time setting (minutes)	0
Minimum Brightness level (lux) (min)	5
Maximum Brightness level (lux) (max)	100
Tecnology	Infrareds (PIR)
Mounting	Flush ceiling
Admits contactor	No
Zero crossing point	No
Compatible with	KNX-RF Easy Mode
Radiofrequency	868,3MHz
Maximum coverage (m)	100
Minimum Working Temperature (ºC) (min)	-5
Maximum Working Temperature (ºC) (max)	45
Protection Degree	IP20, Class II

Compatible with the actuators: TM KNX 001 & CO KNX 002.