Ipas DaliControl b04 Pro

The IPAS DaliControl b04Pro is a broadcast KNX DALI gateway that serves as a 4-channel single-master application controller for controlling electronic ballasts with a DALI interface via the KNX installation bus. KNX Data Secure supported.

The device converts switching and dimming commands from the connected KNX system into DALI broadcast telegrams. In addition, the gateway analyses status and event information from the DALI bus and makes it available to the KNX bus.

The DaliControl b04 Pro has four DALI outputs, to which up to 32 ECGs can be connected.

The power supply for the connected ECGs is provided directly by the device. Additional DALI power supplies are not required. 

The device is available in a 4-module wide top-hat rail enclosure for direct installation in an electrical distribution board. The bus is connected via a bus clamp. The mains and DALI lines are

connected via screw terminals on the device.

The ECGs can be controlled via 4 channels using broadcast telegrams for each gateway. In addition to channel control, the DaliControl b04 Pro also allows simultaneous central control of up to 128 ECGs.

The KNX DALIControl Gateway b04 Pro supports DT8 ECGs for controlling RGB(W) and WW/CW LEDs for fexible colour mixing and for precise adjustment of the colour temperature. The parameterisation and confguration of the gateway is done exclusively via the ETS

application of the b04 Pro. It is not necessary to commission or confgure the ECGs on the DALI side.