Switching Actuator N 562/11

Switching actuator M3x 10AX C-L N 562/11

Switching actuator main module 3x AC 230V, 10AX, C-load, load current monitoring,
with interface for connecting a switching actuator submodule and software for controlling up to 4 switching actuator submodules 3x 10AX or 3x 16AX in any combination,
with power supply for its own electronics and for the electronics of the connected switching actuator submodules via the bus voltage,
with one relay contact per output as switching element,
rated contact operating voltage AC 230V, rated contact frequency: 50/60 Hz,
rated contact current to DIN EN 60669-1: 10AX,
fluorescent lamp load to DIN EN 60669-1: 10AX (140礔) at AC 230V,
switching current in AC1 mode (cosPHI = 0.8) to DIN EN 60947-4-1: 16A at AC 230V,
switching current in AC3 mode (cosPHI = 0.45) to DIN EN 60947-4-1: 10A at AC 230V,
number of switching cycles in AC1: > 105,
number of switching cycles in AC3: > 3 x 104,
with button for toggling between bus mode and direct mode and for selecting the device to be switched (main module or submodule 1...4),
with status object for reporting direct mode,
with yellow LED to indicate direct mode activated,
with 1 green LED each to indicate the selected device,
with a push button per output to switch in direct mode each output of the selected device via a toggling function, functional if the bus voltage is available, even if the bus communication has failed or is not yet in operation,
with 1 red LED to indicate the switching state per output of the selected device,
with selection of whether all outputs of the device are to be set identically or individually,
with selectable operating mode for each output (normal mode, time switch mode),
with selectable relay mode (NC contact / NO contact) for each output,
with status object as an optional addition for each output,
with sending of status objects on request and/or automatically after a change,
with variable On and Off delay times for each output,
with selectable logic operation (AND/OR) of two communication objects and variable start value of the logic operation at bus voltage recovery for each output,
with selectable switching state for each output at bus voltage failure and recovery,
with optional addition of a night mode object per output for time-limited switching On of the output (and hence the illumination) at night,
with variable On period at night or time switch mode,
with selectable post-triggering of the On period (On period extension) in time switch mode,
with selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) at night or in time switch mode,
with selectable function, including additional communication object for manual override of an output,
with selectable forced control, including additional communication object for switching an output on or off in forced mode,
with selectable 3-phase switching function (simultaneous switching of 3 outputs),
with selectable 1- to 3-stage fan speed control function,
with selectable function for controlling thermo-electrical drives by pulse width modulation (PWM), including a function for avoiding calcification of a valve,
with selectable counting of operating hours and with threshold monitoring of the operating hours,
with selectable counting of load cycles and with threshold monitoring of the load cycles,
with selectable load current recording in the range of 0.1�16A with 10AX and 0.1�20A with 16AX and with load current monitoring on an adjustable upper and lower threshold,
with integrated 8-bit scene control and linking of each output into up to 8 scenes, 
with integrated bus coupling unit,
with bus connection via bus terminal,
as rail-mounted device for mounting on a rail TH 35 according to DIN EN 60715

dimension: max. module width 3 MU (1 MU = 18 mm)

Manufacturer: Siemens
Order no.: 5WG1 562-1AB11