Swiss Garde 300 KNX/KLR IP55 flush-mount, constant light control.

Master/secondary occupancy detector, wall mounted from

1.0 to 3.0 m possible thanks to horizontal and vertical detection range, constant light control for 2 zones, 1 secondary zone (ON/OFF), HVAC, brightness threshold and follow-up time can be changed during operation, standby light, fully and semi-automatic mode.

Swiss Garde 300 KNX/KLR IP55 surface mounting (AP).

• KNX presence detector for surface wall mounting
• SG300 Presence KNX/KLR IP55 AP
• 3 PIR sensors with 300° detection range sideways and downwards
• At a mounting height of 3m range radius 10m (walking person) radius 4m (sitting person)
• Mounting height 1…3m
• Degree of protection IP55
• 1x light channel on/off or 2x light channel constant light control
• 1x HVAC channel
• 1x standby light with 2 selectable values ??for e.g. day/night situation
• Dynamic value change for follow-up time and brightness or switching threshold
• Master/Secondary function
• 8 scenes programmable
• Extension input for on/off/dimming
• Configuration via ETS
• Input voltage: 30 Vdc KNX Bus
• Detector output: KNX
• Maximum power consumption: 0.3 W
• Maximum current consumption: 10mA
• Number of channels: 2 channels
• Luminous intensity range: 10 lux - 2000 lux
• Switch-off delay: 1 s – 24 min
• Detection angle: 180°
• Detection range (PIR): ø 10 m at a height of 3 m
• Ambient temperature: -20 – +40 °C
• Mounting: surface
• Mounting height: 1 - 3 m
• conductor cross-section
  • 1.5 mm² per connection terminal
• Dimensions (HxWxD): 88 x 88 x 84 mm
• Change settings: ETS software
• Impact resistance: IK02